동신대학교

초록/요약

The most important element is a rise ratio when regarding beauty and economics of arch bridges. Only the effect of dead load has been considered to decide the rise ratio. In this study, when going over the rise ratio of arch bridges, examined the problems, that the determination of the rise ratio by the dead load has, by adding the factor of a determination of optimum rise ratio, which is not only the effect of the dead load that has been currently considered but also the problem with respect to wind resistant dynamic stability that is now taken seriously. Synthetically, when deciding rise ratio that is investigated in basic step of design, it is not necessary to consider the evaluation wind resistant dynamic stability. Therefore the result of this research can be summarized as followes ; If it is identify oneself with rise ratio that the divided ratio due to the tie girder of the 3 continuous spans half-through steel arch bridges cannot cause a big effect in stability the wind resistant dynamic stability. If it is identify oneself with the relative stiffness ratio and girder depth ratio of the 3 continuous spans half-through steel arch bridges that the rise ratio proposes that it uses 0.10~0.30, divided ratio due to tie girder proposes that it uses 1.0~2.5 because of the wind resistant dynamic stability and the stress of the hanger. The rise ratio proposes that it uses 0.16~0.18 is given by the Japanese bridge construction association to obtained in investigation equation between an arch span length and the rise, using 0.1~0.2 at the basic design phase and the divided ratio which using 1.5 due to tie girder generally has been employed to main results and very well agrees with a research accomplishment results.